User`s guide

Paper Handling 3-23
OG L
Setting the Table Adjust
Table Adjust is a function for adjusting the table height of the Input Tray. This function
is used when try to resolve occurrence of following paper jams.
■ Paper Jam Tray 1 (E1A0, E1A1, E1A2)
■ Paper Jam Tray 2 (E1A3, E1A4, E1A5)
■ Paper Jam HCF1 Lower (E1A6, E1A7, E1A8) (if installed)
■ Paper Jam HCF1 Upper (E1A9, E1AA, E1AB) (if installed)
■ Paper Jam HCF2 Lower (E1AF, E1B0, E1B1) (if installed)
■ Paper Jam HCF2 Upper (E1B2, E1B3, E1B4) (if installed)
■ Double Feed Jam Tray 1(E150, E151)
■ Double Feed Jam Tray 2 (E152, E153)
■ Double Feed Jam HCF1 Lower (E154, E155) (if installed)
■ Double Feed Jam HCF1 Upper (E156, E157) (if installed)
■ Double Feed Jam HCF2 Lower (E15A, E15B) (if installed)
■ Double Feed Jam HCF2 Upper (E15C, E15D) (if installed).
1. To display the Table Adjust screen, make the following selections from the OCP:
Printer/Paper Source/Table Adjust
Figure 3-28. Setting the Table Adjust (1)
NOTE:
Before using this function, check the deformation of the paper in the Tray,
such as curl, waving or folding. If the paper has deformation, remove the
deformed paper in the Tray.
If other paper is loaded after changing the Table Adjust setting, paper
jams listed above may occur. Restore to “Normal” setting if loading other
paper.
0 4