User`s guide

Paper Handling 3-21
OG L
Setting the HV Adjust Values
The HV adjust feature is used when it is necessary to shift the image on the printed
page. You can shift the image
– 0.25 in. (– 6.3 mm). When printing in duplex mode,
you can set different HV adjust values for the front side and back side of the paper.
1. To display the HV Adjust screen, make the following selections from the OCP:
Printer/Paper Source/HV Adjust
Figure 3-23. Setting the HV Adjust Values (1)
2. On the Tray Adjust screen, choose Front or Back face you will adjust, and select
the unit of adjust value.
Figure 3-24. Setting the HV Adjust Values (2)
3. Touch the vertical position value box. The HV Adjust input screen is displayed.
Figure 3-25. Setting the HV Adjust Values (3)
Paper Face
Unit of adjust value
Vertical Position Value Box
0 4