User`s guide

Paper Handling 3-19
OG L
Setting the Paper Weight Value
When you load paper into the tray, you must set the paper weight value by using the
OCP.
1. To display the Paper Weight screen, make the following selection from the OCP:
Printer/Paper Source/Paper Weight
Figure 3-20. Setting the Paper Weight Value (1)
2. Select desired paper tray to set the paper weight. The Paper Weight input screen is
displayed.
Figure 3-21. Setting the Paper Weight Value (2)
CAUTION!
You must set the correct paper weight value. The incorrect paper weight
value may cause paper jam.
0 4