User`s guide

3-12 Paper Handling
OG L
7. If the paper size you have loaded is a standard size, set the Custom Size Switch to
“Standard” position. If the paper size you have loaded is a non-standard or a
custom size, set the Custom Size Switch to “Custom” position.
Figure 3-11. Loading Paper in Tray (7)
8. Gently close the Tray.
9. If the paper specification you have loaded is a first use, or paper specification is
changed from previous one, set the paper weight refer to “Setting the Paper
Weight Value” on page 3-19.
10. If the paper size you have loaded is a non-standard size, see “Setting the Non-
Standard Paper Size” on page 3-15.
NOTE:
Standard paper sizes are shown in a table “Paper Sizes, Paper Weights,
Paper Types and Paper Color” on page 3-3.
NOTE:
The Paper Height Error (E0BB, E0BD, E0BF, E0C1, E0C3 or E0C5)
might be caused if there is paper deformation such as curl, waving or
folding. In this case, remove the deformed paper from the Tray.
0 2