User`s guide

3-2 Paper Handling
OG L
Paper
To obtain good print quality, use the recommended paper and properly position it in the
correct trays. For the loading paper, see “Loading Paper” on page 3-7. Refer to
Appendix B for detailed information about paper specifications and printing on special
print media.
Unacceptable Paper
Avoid using the following media as they cause paper jams and print quality problems.
■ Excessively thick or thin paper
■ Paper that has already been printed (preprinted letterhead is allowed)
■ Wrinkled, torn, or bent paper
■ Moist or wet paper
■ Curled paper
■ Paper with an electrostatic charge
■ Glued paper
■ Paper with special coating
■ Colored paper with surface treatment
■ Paper unable to withstand temperature of 210°C (410°F) and pressure of about
250kPa (36.3k lbs/in
2
)
■ Thermal paper
■ Carbon paper
■ Paper with paper fasteners, ribbons, tape, etc., attached
■ Heavily textured paper
■ Label stock with exposed backing sheets
Storing Paper
Store the paper properly to avoid print quality problems and paper jams.
■ Store paper horizontally, in a flat, dry location to avoid wrinkling, bending,
curling, etc.
■ Store paper away from direct sunlight.
■ Store any unused paper in its original packing.
0 0