User`s guide

2-26 Control Panels
OG L
Sub Panel
Sub panel is equipped to each Input and Output Tray. The contents of sub panel are
shown below.
Figure 2-12. Sub Panel
Paper Size LED
Indicates paper size that is loaded in the Input Tray or stacked in the Output Tray. See
“Paper Size Indication” on page 3-4 for indication of each paper size.
Select LED
When this LED is ON, it means the Tray is currently selected.
When this LED is blinking, it means the following cases;
■ Paper jam is occurred at selected tray.
■ Down Switch was pressed.
Paper Level Indicator (LED1/2/3)
For Input Tray, it indicates paper level (paper amount) that is loaded in the Input Tray
by 3 levels. For Output Tray, it indicates paper level (paper amount) that is stacked in
the Output Tray by 3 levels.
When all LEDs are off, it means the Input Tray or the Output Tray is empty.
When LED3 is blinking, it means the Input Tray or the Output Tray is near empty.
When LEDs for Output Tray are blinking, it means the Output Tray is full.
Lock LED
When this LED is ON, Input Tray or Output Tray is locked, and cannot be opened.
When this LED is OFF, Input Tray or Output Tray is unlocked, and can be opened.
When this LED is blinking, it means the table in the Tray is moving up or down.
Down Switch
Use to unlock the Tray. When the Lock LED is ON, press this switch to down the table
in the Tray and unlock the Tray.
Paper Size LED
Select LED
Paper Level Indicator
Lock LED
Down Switch
(LED 1)
(LED 2)
(LED 3)
0 2