User`s guide

2-20 Control Panels
OG L
System
The System option is password protected. Contact your System Administrator if you
need access to these options.
■ Software Log
Create software log
■ Network
Defines the parameters of the network. The standard network (10/100/1000B-T)
is displayed as “Network (AUX)”. If the Multi-protocol NIC option (10/100B-T)
is installed, “Network (NIC)” is also displayed. Following parameters can be set
to each networks.
❒ IP Address
Can be set desired IP Address. Factory default is 192.0.0.1.
❒ Subnet Mask
Can be set desired Subnet Mask. Factory default is 0.0.0.0.
❒ Gateway Address
Can be set desired Gateway Address. Factory default is 0.0.0.0.
❒ Boot Method
Can be set Boot Method to Static or DHCP. If the Multi-protocol NIC option
is installed, can be set to Auto Select, DHCP, RARP or Static. Factory default
is STATIC.
❒ HTTP Port
Can be set HTTP port to desired port number. Factory default is 80.
■ Exit Jam Recovery
Can be set to enable or disable. When set to enable, the printer will reprint pages
that were improperly printed due to a paper jam.
■ Calendar
The following settings can be made.
❒ Time Zone - See the following table for options.
❒ Date - 0000/00/00 (Year/Month/Day)
❒ Time - Set printer clock
■ Country Code
Select the appropriate country code used in international phone numbers. The
default setting is 1.
■ Energy Save Mode
Can be set to enable or disable.
0 3