User`s guide

2-18 Control Panels
OG L
Table 2-3. Printer Menu Structure - Continued
Note 1: This menu is displayed only when the Additional Stacker is installed.
Note 2: This menu is displayed only when the HCF is installed.
Note 3: This menu is displayed only when the Halftone Selection in the Service menu is
enabled.
Note 4: This menu is available only when the Transit Pass Unit Type 156 is installed.
Level 1 Level 2 Level 3 Level 4 Level 5 Level 6
Printer Paper Source Paper Moisture 1 Highest/Higher/
Normal/Lower
2 Highest/Higher/
Normal/Lower
HCF1 Lower
(Note 2)
Highest/Higher/
Normal/Lower
HCF1 Upper
(Note 2)
Highest/Higher/
Normal/Lower
HCF2 Lower
(Note 2)
Highest/Higher/
Normal/Lower
HCF2 Upper
(Note 2)
Highest/Higher/
Normal/Lower
HCF Tray Control
(Note 2)
Normal Pick Mode
Prior Pick Mode
Paper Output Default Output
(Note 1)
Container 1 Lower
Container 1 Upper
Container 2 Lower
(Note 1)
Container 2 Upper
(Note 1)
Pass Through (Note 4)
Finishing (Note 4)
Stacking Level 1 Lower :Short 100%/75%/50%
1 Lower :Long 100%/75%/50%
1 Upper :Short 100%/75%/50%
1 Upper :Long 100%/75%/50%
2 Lower :Short
(Note 1)
100%/75%/50%
2 Lower :Long
(Note 1)
100%/75%/50%
2 Upper :Short
(Note 1)
100%/75%/50%
2 Upper :Long
(Note 1)
100%/75%/50%
Options Wait Timeout 0-999 seconds
LPD Queuing Enable/Disable
Duplex-Always Enable/Disable
Print Density Light/Semi-Light/
Middle/Semi-Dark/
Dark
Auto Proof
Sample
0, 500, 1,000, 1,500,
2,000, 2,500, 3,000,
3,500, 4,000, 4,500,
5,000
Cover Insert
Mode (Note 4)
Cover Insert/Bypass
PostScript Print Errors Enable/Disable
Best Fit Enable/Disable
Job Timeout 0 second or
15-999 seconds
Halftone Density
(Note 3)
Light/Medium/Dark
Test Print Cross Pattern Select Paper Source Select Paper
Destination
Raster Pattern Select Paper Source Select Paper
Destination
PCL Wide A4 Enable/Disable
Requested Tray Exclusively/First
0 3