User`s guide

1-6 Printer Overview
OG L
Powering On the Printer
The printer has two power switches, the Main AC Power Switch and the Power
Switch. The location of switches are shown below. Both switches are marked “I” for
power on.
Figure 1-3. Powering On the Printer
When the printer is powered on, the printer go through a power-up sequence that takes
approximately 5 minutes. During the power-up sequence, the printer runs a series of
internal tests.
CAUTION!
Once the printer is powered off, wait at least 5 seconds to next power on.
If the printer does not power on, power off the printer, wait at least 30
seconds, then power on the printer again.
Main AC Power Switch
Power Switch
0 0