User`s guide

1-4 Printer Overview
OG L
External View of the Printer
The following illustration shows the printer with optional Container Stacker, optional
High Capacity Feeders, optional Finisher Transfer Unit and optional Attention Light
are installed.
Figure 1-1. External View of the Printer
Table 1-1. External View of the Printer
Key Component Description
1 Power Switch Press to turn the printer on and off.
2 Front Cover Open to replace units, clear paper jams, or clean the printer.
3 Toner Supply Cover Open to replenish the toner supply.
4 Operator Control Panel (OCP) Displays printer status and menu information.
5 Tray 1 Holds up to 2,500 sheets of paper.
6 Tray 2 Holds up to 1,000 sheets of paper.
7 High Capacity Feeder 1 Two 3,000-sheet input trays.
8 HCF1 Lower Tray Holds up to 3,000 sheets of paper.
9 HCF1 Upper Tray Holds up to 3,000 sheets of paper.
10 High Capacity Feeder 2 Two 3,000-sheet input trays.
11 HCF2 Lower Tray Holds up to 3,000 sheets of paper.
12 HCF2 Upper Tray Holds up to 3,000 sheets of paper.
13 Sample Tray 100-sheet output tray
14 Container Stacker 1 Two 2,000-sheet output trays
15 Container1 Lower Tray Stacks up to 2,000 sheets of paper.
16 Container1 Upper Tray Stacks up to 2,000 sheets of paper.
17 Container Stacker 2 Two 2,000-sheet output trays
18 Container2 Lower Tray Stacks up to 2,000 sheets of paper.
19 Container2 Upper Tray Stacks up to 2,000 sheets of paper.
20 Attention Light Indicates error, warning and printer ready status.
21 Transit Pass Unit Type 156 Paper transport unit for Post Device.
1. Power Switch
2. Front Cover
5. Tray 1
6. Tray 2
9. HCF1 Upper Tray
12. HCF2 Upper Tray
3. Toner Supply Cover
4. Operator Control Panel
14. Container Stacker 1
17. Container Stacker 2
7. High Capacity Feeder 1
16. Container1 Upper Tray
15. Container1 Lower Tray
19. Container 2
Upper Tray
18. Container 2
Lower Tray
13. Sample Tray
10. High Capacity Feeder 2
11. HCF2 Lower Tray
8. HCF1 Lower Tray
20. Attention Light
21. Transit Pass Unit
Type 156
0 1