User`s guide

A-2 Specifications
OG L
Specifications
Base Printer
Design and specifications are subject to change without notice.
* Maschinenlärminformations-Verordnung - 3. GPSGV, 06.01.2004:
Der höchste Schalldruckpegel beträgt 70dB(A) oder weniger gemäß EN ISO7779
Table A-45. Base Printer Specifications
Item Specification
Imaging Method Electro-Photography.
Exposure System Semiconductor 4 laser beam (laser diode) scanning.
Image Resolution 600 x 600 dots per inch (dpi).
Warm-up Time
Less than 300 seconds after sleep mode at room
ambient 68
o
F (20
o
C).
Continuous Print Speed in
Simplex mode
Up to 156 pages per minute (ppm) A4/Letter/Legal
(LEF).
Printable Area Full size of the paper.
Guaranteed Printing Area
Inside area of following boundalies;
5mm from the leading edge of paper
5mm from the side edge of the paper
8mm from the trailing edge of the paper
Controller Embedded controller with PowerPC 750FX 800MHz.
Memory Capacity 256MB
Maximum Monthly Print
Volume
Up to 4,500,000 prints (A4/Letter)
Nominal Voltage 200/208/220/230/240/380/400/415 V
Nominal Frequency 50 Hz or 60 Hz.
Power Consumption
(Standard Configuration)
4.6kW (Avarage)
Noise Level *
70 dBA in operation.
60 dBA in standby.
Operating Temperature and
Humidity
Temperature range: 60 to 90 F (16 to 32 C).
Humidity range: 20-80% RH (no condensation).
Recommended Operating
Temperature and Humidity
Temperature range: 66.2 to 77 F (19 to 25 C).
Humidity range: 40-60% RH (no condensation).
Dimensions
(Standard Configuration)
2169 x 1350 x 1105mm (H x W x D).
Weight 860kg.
Product Life 90,000,000 images or 5 years, whichever comes first.
0 0