User`s guide

Web Utilities 6-47
OG L
There are five fixed and two custom tray mappings available. The fixed tray mappings
are selected by the ESC |X{#]J command with a parameter in the range 100-105 or
200-205. The custom Input Tray Mappings are selected with a parameter in the range
106-107 or 206-207. All of the PCL Input Tray Mappings are displayed on the PCL
Input Tray Mapping web page and the custom Input Tray Mappings may be modified
using this interface. Clicking the trash can icon at the top of one of the custom Input
Tray Mappings will clear all entries to zero. The “ID” value on the page is the
parameter for the PCL command ESC &|[#]H (range 0..69) used to select a tray or
group of trays.
Tray Map
Clicking on the “...” icon for an “ID” will activate a pop-up window to help you
configure the tray mapping for that ID
Figure 6-41. Tray Map
For detailed information on tray mapping and grouping, refer to the PCL
Programming Guide, “Paper Source”.
0 1