User`s guide

6-46 Web Utilities
OG L
PCL Input Tray Mapping
PCL Input Tray Mapping allows you to select an individual tray mapping for the
printer. You may override the default printer Input Tray Mapping for a job by using
the Input Tray Selection mode command. See the ESC |X[#]J command and the Tray
Group Code sections in the PCL Programming Guide.
Figure 6-40. Configuration-Configuration-PCL Input Tray Mapping
The Submit button at the bottom will transfer your new selections to the printer.
These selections will become active the next time the PJL environment values are set
to their default values. This happens when:
■ PJL mode is entered with a Universal Exit Language (UEL) command.
■ a PJL End Of Job (EOJ) command is processed.
■ a PJL INITIALIZE command is processed.
■ a PJL RESET command is processed.
■ the printer is reset to the Factory default from the OCP or SNMP.
0 2