User`s guide

Web Utilities 6-23
OG L
HV Adjust
The HV adjust page is displayed when click on HV Adjust. The setting of the HV
Adjust is common for all trays.
Figure 6-18. System-Tray (2)
The arrow on the HV Adjust screen indicates paper feed direction. The adjustment can
be set to millimeters or inches and the range is -6.3 to +6.3 millimeters (-0.25 to +0.25
inches) in increments of 0.1 millimeter (0.01 inch). Difference positions can be set for
front and back side in duplex printing mode. See “Setting the HV Adjust Values” on
page 3-21 for more information.
The settings on this page reflect what is set on the Operator Control Panel. If you
make changes to this page and click the Submit button, the changes will be reflected
on the Operator Control Panel.
0 2