User`s guide

5-10 Troubleshooting
OG L
Table 5-5. Printer Status Messages
Message Description Corrective Action
Paper Out Tray Name The specified paper tray is out of paper Load paper into the Tray.
Tray Name Active Displayed during printing. None
Input Keycode
A valid keycode is required to activate
this feature.
Contact your System Administrator or
authorized Service Technician.
Resetting
Status message. The printer is
resetting the configuration.
Wait for the printer to return to Ready
state.
Sleep Mode
The Energy Save time has been
reached and the printer is in energy
saving mode.
Touch the OCP to initialize the printer.
Duplex Always Duplex-Always mode is enabled.
Contact your System Administrator for
more information.
Spooling The printer is spooling print data. None
Preserving Parameters The printer is saving user settings. None
Deleting Jobs
Status Message. The selected jobs are
being deleted from the print queue.
Wait for the printer to return to Ready
state.
Spool directory is full
The disk space for LPD/RawTCP
(Spool) is insufficient.
Refer to “General Printing Problems”
on page 5-4.
Job too big - Data flushed
The disk space for RawTCP (spool) is
insufficient
Refer to “General Printing Problems”
on page 5-4.
Insufficient Disk Space
One Copy Job
Since the capacity of a hard disk space
is insufficient for MOP (Multiple
Original Printing). Only one copy is
printed.
Refer to “General Printing Problems”
on page 5-4. and “Printer Notice” on
page 5-7.
0 1