User`s guide

5-8 Troubleshooting
OG L
■ “Sample” button or “Auto Proof Sample” function
Do not use the “Sample” button or the “Auto Proof Sample” function when using
the page number predetermined paper.
■ MOP and Reverse Page Order Limits
The standard of the printing number of pages restrictions at the time of MOP
(Multiple Original Printing) and Reverse Page Order is as follows.
However, following printing number of pages may change depending on actual
printing environment.
■ Accounting Slip Sheet
Client IP Address, Client Network Name, User Name, Document Name,
Department Name and Charge Code are not printed on the Accounting Slip Sheet
when the print job is sent from printer driver. (User Name and Document Name
may be printed if the LPR protocol is used.)
■ When using Transit Pass Unit Type156 and Finisher
❒ When an image such as bold lines, etc., are printed on one side of the folded
centermost sheet, and the other side of the page is blank, the bold lines, etc.,
may be slightly transferred to the blank page (ghost-print). When using the
finisher, please confirm by printing one set in beforehand. Please lower the
print density of the printer if ghost-print occurs.
❒ When stitching more than 20 sheets of 75g/m2 (20lbs.) or less paper at the top
/ side / corner, paper edge alignment may be uneven at the stitched corner,
leading to paper jams. It is recommended to use 75g/m2 (20lbs.) or heavier
paper.
Table 5-4. Printing number of pages of MOP and Reverse Page Order
Paper Size
Number of Pages
Duplex Simplex
B5 3000 1500
Letter/A4 3000 1500
B4 2000 1500
Ledger/A3 2000 1500
0 2