User`s guide

Care and Maintenance 4-21
OG L
3. Tilt the CF Case toward the Air System side.
4. Pull out the Fine Filter to remove it
Figure 4-36. Replacing the Fine Filter (3)
5. Set the new Fine Filter into the CF Case.
6. Close the CF Door.
7. Close the SF Cover.
8. Place the old Fine Filter in a polyethylene bag and properly dispose of it.
NOTE:
Attach the seal supplying with the new Fine Filter onto the opening of the
Fine Filter to prevent splashing the toner.
NOTE:
After the OCP displayed “Fine Filter End of Life”, printer can not print at
all. Prepare the new Fine Filter for backup anytime.
0 0