User`s guide

4-16 Care and Maintenance
OG L
11. Close the Front Cover (L).
NOTE:
After the OCP displayed “Developer Mix. End of Life” for the first time,
the printer can still prints about 60,000 sheets of paper by pressing the
“
” key. (The sheet count may be changed by the number of rotations of
photoconductor drum.) However, The developer should be replaced
without the delay because the print quality may be affected.
Do not use more than one bottle of developer at any one time. Be sure that
the amount of replacing developer is not more than or less than one bottle.
Take care that no foreign matter mixes with the developer. The foreign
matter in the developer can damage the OPC Sheet, causing a print
problem.
If the developer is contaminated with dirt, oil, water, or other foreign
matter, immediately stop the printer and contact your Service Technician.
The developer should be used within one year after purchase. Once the
developer is unsealed, use it immediately and do not keep it for later use.
WARNING!
Do not throw the developer bottle into a fire because it may suddenly burn,
causing a risk of fire or personal injury.
0 0