User`s guide

Care and Maintenance 4-13
OG L
4. Lock the bottle in place by turning the developer bottle cap about 160 degrees in
the direction of the arrow until it stops.
Figure 4-21. Replacing the Developer Mix (11)
5. To start the replacement process, make the following selections from the OCP,
and touch the “ -- ” button:
Setup / Consumable / Developer Mix / Supply
Figure 4-22. Replacing the Developer Mix (12)
CAUTION!
Hold the developer bottle when you turn the cap so that the bottle is not
turned together with the cap.
Incorrect setting of the Developer Bottle cause damage to the Developer
Unit. Make sure the setting of the Developer Bottle before go to next step.
0 1