User`s guide

4 007-5688-001
1: Introduction
Note: The SGI Rackable C2108-TY10 does not come with a UIO card pre-installed.
When the RAID option is ordered, this slot is filled with the RAID card.
Onboard Controllers/Ports
One onboard ATA/100 connector, which supports IDE hard drives or ATAPI devices. The
color-coded I/O ports include one COM port (an additional COM header is located on the
serverboard), a VGA (monitor) port, two USB 2.0 ports (two additional USB headers and one
Type A port are included on the serverboard), PS/2 mouse and keyboard ports and two gigabit
Ethernet ports.
ATI Graphics Controller
The dual processsor serverboard features an integrated ATI video controller based on the ES1000
32 MB graphics chip. The ES1000 was designed specifically for servers, featuring low power
consumption, high reliability and superior longevity.
Other Features
Other onboard features that promote system health include onboard voltage monitors, a chassis
intrusion header, auto-switching voltage regulators, chassis and CPU overheat sensors, virus
protection and BIOS rescue.
Server Chassis Features
The following is a general outline of the main features of the SGI Rackable C2108-TY10 server
chassis.
System Power
The SGI Rackable C2108-TY10 server chassis features a redundant 720W power supply
composed of two separate power modules. This power redundancy feature allows you to replace
a failed power supply without shutting down the system.