User`s guide

84 007-5688-001
7: BIOS
Caution: Any cleared information is unrecoverable. Make absolutely sure that you no longer
need any data stored in the log before clearing the BMC Event Log.
Set LAN Configuration
Set this feature to configure the IPMI LAN adapter with a network address as shown in the
following graphics.
Channel Number - Enter the channel number for the SET LAN Config command. This is initially
set to [1]. Press "+" or "-" on your keyboard to change the Channel Number.
Channel Number Status -This feature returns the channel status for the Channel Number
selected above: "Channel Number is OK" or "Wrong Channel Number".
IP Address Configuration
Enter the IP address for this machine. This should be in decimal and in dotted quad form (i.e.,
192.168.10.253). The value of each three-digit number separated by dots should not exceed 255
as shown in the screen below.
Parameter Selector
Use this feature to select the parameter of your IP Address configuration.
IP Address
The BIOS will automatically enter the IP address of this machine; however it may be over-written.
IP addresses are 6 two-digit hexadecimal numbers (Base 16, 0 ~ 9, A, B, C, D, E, F) separated by
dots. (for example, 00.30.48.D0.D4.60).
Current IP Address in BMC
This item displays the current IP address used for your IPMI connection.
!