User`s guide

64 007-3938-003
3: L1 and L2 Controller Commands
Example 3-35 l1dbg Command Output
001c07-L1>l1dbg
L1 irouter debugging is off
L1 junkbus communication debugging is off
L1 environmental debugging is off
L1 port interrupt debugging is off
L1 i2c interrupt debugging is off
L1 voltage margin debugging is off
Use l1dbg junkbus <on|off> to turn on communication debugging for the L1
controller-to-junkbus-ASIC communication. Example 3-36 shows sample output from
the l1dbg junkbus on command.
Example 3-36 l1dbg junkbus on Command Output
001c07-L1>l1dbg junkbus on
L1 irouter debugging is off
L1 junkbus communication debugging is on
L1 environmental debugging is off
L1 port interrupt debugging is off
L1 i2c interrupt debugging is off
L1 voltage margin debugging is off
The other l1dbg commands in this set function in the same manner as the l1dbg
junkbus <on|off> command. Table 3-2 lists the debugging features that each
command controls.
Table 3-2 l1dbg Commands
Command Description
l1dbg junkbus <on|off>
Controls junkbus ASIC debugging.
l1dbg irtr <on|off>
Controls irouter debugging.
l1dbg env <exp>
Turns on environmental debugging. Options for
<exp> are 1=power, 2=fan, 4=temperature, 8=setup.
l1dbg env off
Turns off environmental debugging.
l1dbg port <on|off>
Controls L1-port interrupt debugging.
l1dgb i2c <on|off>
Controls I
2
C interrupt debugging.
l1dbg margin <on|off>
Controls voltage margin debugging.