User`s guide

L1 Controller Commands
007-3938-003 63
l1
Use the l1 command to engage the L1 controller command processor. Press Ctrl+D to
disengage the command processor. Example 3-34 shows sample output.
Example 3-34 l1 Command Output
001c003-L1>l1
L1 command processor engaged, <CTRL-D> to exit.
Used on all bricks.
l1dbg
The following l1dbg command set displays and sets the state of communication
debugging features.
• l1dbg
• l1dbg junkbus <on|off>
• l1dbg irtr <on|off>
• l1dbg env <exp> (1=pwr, 2=fan, 4=tmp, 8=setup)
• l1dbg env off
• l1dbg port <on|off>
• l1dbg i2c <on|off>
• l1dbg margin <on|off>
• l1dbg pppdump <on|off>
• l1dbg promreq <on|off>
• l1dbg qsusp <exp> <exp>
Use l1dbg to display the state of the communication debugging features. Example 3-35
shows sample output.