User`s guide

54 007-3938-003
3: L1 and L2 Controller Commands
The voltage status contains five columns as follows:
• The Description column provides the name of the supply voltage (2.5 V, 3.3 V, 5 V,
etc.).
• The State column provides the current state of the supply voltage (Enabled, Fault,
Warning, Waiting, or Disabled).
• The Warning Limits column provides the range of voltages that, when exceeded,
causes a supply voltage to be in a Warning state.
• The Fault Limits column provides the range of voltages that, when exceeded, causes
a supply voltage to be in a Fault state.
• The Current column provides the current value of the supply voltage.
The fan status contains four columns, as follows:
• The Description column provides the name of each fan.
• The State column provides the current state of the fan (Warning, Enabled, Waiting,
or Disabled).
• The Warning RPM column provides the lowest revolutions-per-minute allowed
before a fan enters a Warning state.
• The Current RPM column provides the current value of the revolutions-per-minute
for the fan.
The temperature status contains six columns as follows:
• The Description column provides the name of a temperature sensor.
• The State column provides the current state of the temperature sensor (Fault,
Warning, Enabled, or Disabled).
• The Advisory Temp column provides the temperature that, when exceeded, causes
a temperature advisory state.
• The Critical Temp column provides the temperature that, when exceeded, causes a
critical temperature state.
• The Fault Temp column provides the temperature that, when exceeded, causes the
temperature sensor to be in a Fault state.
• The Current Temp column provides the current temperature reading from the
temperature sensor.