User`s guide

48 007-3938-003
3: L1 and L2 Controller Commands
maximum of +12 (for 12 hours ahead of GMT) and a minimum of -12 (for 12 hours behind
GMT).
Used on all bricks.
debug
The following debug command set provides the status of and sets the virtual debug
switches. (In systems that include C-bricks, these commands are valid only for C-bricks.)
• debug
• debug <switches>
Use the debug command to determine the current settings for the virtual debug
switches. Example 3-15 shows sample output.
Example 3-15 debug Command Output
001c07-L1>debug
debug switches set to 0x0000.
Use debug <switches> to set the virtual debug switches. The variable <switches> is a
hexadecimal value for the switches. Example 3-16 shows sample output.
Example 3-16 debug <switches> Command Output
001c07-L1>debug 0x0001
debug switches set to 0x0001
Used on a C-brick or on server bricks performing the compute function.
display
The following display command set displays text on the front panel display and controls
the LEDs on the front panel display.
• display
• display <exp> <command>
• display power on
• display attention on