User`s guide

L1 Controller Commands
007-3938-003 47
cti
Use cti <command> to send a command to an I/O interface (II) port (port A) found in
I/O bricks (such as I-brick, P-brick, and so on) cabled to a C-brick. Example 3-13 shows
sample output from the cti version command.
Example 3-13 cti version Command Output
003c01-L1>cti version
002c01:
L1 0.7.37 (Image A), Built 05/24/2000 14:59:42 [P1 support]
Used on a C-brick or on server bricks performing the compute function.
date
Use the following date command set to view and set the current date and time used by
the L1 controller.
• date
• date <str>
• date tz
• date tz <str>
Use the date command to view the current date and time value used by the L1
controller. Example 3-14 shows sample output.
Example 3-14 date Command Output
001r19-L1>date
09/14/4655 22:47:07
Use date <str> to set the date and time value used by the L1 controller. The variable
<str> is a time value in the form yyyymmddHHMMSS (where yyyy is the four-digit year,
mm is a two-digit month, dd is a two-digit day, HH is a two-digit hour, MM is a two-digit
minute, and SS is a two-digit second).
Use date tz to display the time zone offset used by the L1 controller. Use date tz
<str> to set the time zone offset used by the L1 controller. The variable <str> is a