User`s guide

L1 Controller Commands
007-3938-003 43
Example 3-5 brick slot <slot number> Command Output
001c07-L1>brick slot 07
brick slot set to 07.
Use brick rackslot <rack number> <slot number> to set the brick rack and slot
number. Example 3-6 shows sample output.
Example 3-6 brick rackslot <rack number> <slot number> Command Output
001c07-L1>brick rackslot 01 07
brick rack set to 01
brick slot set to 07
Use brick partition none to clear the brick partition number. Example 3-7 shows
sample output.
Example 3-7 brick partition none Command Output
001c07-L1>brick partition none
brick partition cleared.
Use brick partition <partition> to set the brick partition number. Example 3-8
shows sample output.
Example 3-8 brick partition <partition> Command Output
001c07-L1>brick partition 1
brick partition set to 1.
Used on all bricks.
config
Use the following config command set to view and reset L1 controller configuration
information, and to check network interface (NI) ring configuration.
• config
• config verbose
• config reset
• config ring