User`s guide

L1 Controller Commands
007-3938-003 41
* (asterisk character)
Use * <command> to broadcast the command specified. For systems with a C-brick, a
command that is broadcasted is sent to all of the bricks that are attached to the C-brick
that issued the command. For systems that do not have a C-brick, a command that is
broadcasted is sent to all systems connected to the system that issued the command.
Example 3-1 shows sample output from the * version command.
Example 3-1 * version Command Output
001c07-L1>* version
001c07:
L1 0.7.27 (Image A), Built 04/28/2000 13:06:43 [P1 support]
001i21:
L1 0.8.xx (Image B), Built 06/13/2000 09:54:32 [P1 support]
Used on a C-brick or on server bricks performing the compute function.
autopower
The following autopower command set enables, disables, and aborts the feature that
enables the system to automatically power up if power is lost. The autopower
command also displays the current autopower setting (see Example 3-2).
• autopower
• autopower on
• autopower off
• autopower abort
Example 3-2 autopower Command Output
001c20-L1>autopower
auto power on is disabled.
Used on a C-brick or on server bricks performing the compute function.