User`s guide

Operating the L1 Controller

007-3938-003 21

001c05-L1> config

:0 - 001c05

:1 - ---i--

:5 - 001c08

:6 - 001p01

001c05-L1> iia brick rack 4

---i--:

brick rack set to 004.

001c05-l1> iia brick slot 1

---i--

brick slot set to 01

001c05-l1> iia reboot_l1

001c05 ERROR: no response from ---i--

001c05-L1> config

:0 - 001c05

:1 - 004i01

:5 - 001c08

:6 - 001p01

001c05-L1>

In the preceding code, the number after the colon symbol (:) indicates the following:

0 = local brick

1 = IIA (II0)

2 = IIB (II1)

5 = NIA (Nl0)

10 = NIB (N11)

Only 0 has a valid meaning, other values are arbitrary based on the system type.

To obtain a detailed conﬁguration explanation from the L1 perspective, enter the

following:

001c05-L1> config verbose

Command Targeting

All commands affect only the local brick, unless the command is preﬁxed with an

asterisk (*). To target a command to all bricks (including the local brick), preﬁx the

command, as shown in the following example:

003c01-L1> * version

003c01:

L1 0.7.37 (Image A), Built 05/24/2001 14:59:42 [P1 support]