User`s guide

20 007-3938-003
2: Using the L1 and L2 Controllers
137.38.88.82:1:0 001c08
L2.
The following example shows how to set rack 1, slot 8, for the C-brick with an IP address
of 127.0.0.1:
L2> config
127.0.0.1:
127.0.0.1:0:0 - ---c--
127.0.0.1:0:1 - 001i01
127.0.0.1:0:5 - 001c05
L2> :0:0 brick rack 1
brick rack set to 001.
L2> :0:0 brick slot 8
brick slot set to 08.
L2> :0:0 reboot_l1
INFO: closed USB /dev/sgil1_0
INFO: opened USB /dev/sgil1_0
L2>
L2> config
127.0.0.1:
127.0.0.1:0:0 - 001c05
127.0.0.1:0:1 - 001i01
127.0.0.1:0:5 - 001c08
L2>
To set the rack and slot from the L1 prompt, simply use the brick rack and brick
slot commands. To set the rack and slot on one of the attached bricks (an attached I/O
brick, C-brick, or a C-brick’s I/O brick), use the L1 targeting commands iia, iib or nia,
nib, as follows: