User`s guide

116 007-3938-003

3: L1 and L2 Controller Commands

Note: For this command, ver may replace the word version, v may replace verbose,

s may replace summary, c may replace check, r may replace rack, and s may replace

slot.

The version command displays the L2 controller ﬁrmware version currently running

in the system controller, as shown in Example 3-98.

Example 3-98 version Command Output

L2>version

L2 version 0.4.0

Use the other commands in this set as follows:

• Use l1 version to view the L1 controller ﬁrmware version currently running in

the system controller.

• Use version verbose to display the verbose view of the L2 controller ﬁrmware

version currently running in the system controller.

• Use version summary to display a summary of the L1 and L2 controller ﬁrmware

versions currently running in the system controller.

• Use version check to display any L1 and L2 controller ﬁrmware version

mismatches in the system.

• Use rack <rng> slot <rng> version summary to display the L1 and L2

controller ﬁrmware versions currently running in the rack(s) and slot(s) that you

specify with the <rng> variable following rack and the <rng> variable following

slot.

• Use rack <rng> slot <rng> version summary to display the L1 and L2

controller ﬁrmware versions mismatches in the rack(s) and slot(s) that you specify

with the <rng> variable following rack and the <rng> variable following slot.

Note: For the <rng> variable, you can enter a single number, or two numbers separated

by a hyphen to indicate a range, or numbers separated by commas to indicate separate

items. For <rng>, you can also enter an asterisk or the word “all” to select all the items

available.