User`s guide

114 007-3938-003

3: L1 and L2 Controller Commands

smp

The following smp command set displays the status of the system maintenance port

(SMP) network connection. These commands are also used to join a speciﬁed SMP group

or leave a current SMP group.

• smp

• smp verbose

• smp join <exp>

• smp leave

Note: For this command set, the mnemonic v may replace the word verbose.

Use the smp command to view the status of the SMP network connection. Example 3-95

shows a sample output.

Example 3-95 smp Command Output

essc1-001-L2>smp

Session Who Group Mode Console

------- ------------- ----- ---- -----------------------

>>> 6 network port 6 L2 038c01 console (default)

1 modem port 1 L2 038c01 console (default)

essc1-001-L2>

Use smp verbose to display an expanded status of the SMP network connection.

Use smp join <exp> to join a speciﬁed SMP group identiﬁed by the <exp> variable. Use

the smp leave command to leave the current SMP group.