User`s guide

L2 Controller Commands

007-3938-003 109

quit

Use the quit command to exit the L2 command processor.

rackid

Use the following rackid command set to display or set the L2 controller rack ID.

• rackid

• rackid <decimal exp>

Use the rackid command to display the rack ID of an L2 controller. Example 3-87 shows

sample output.

Example 3-87 rackid Command Output

essc1-001-L2>rackid

rack ID is 001

essc1-001-L2>

Use rackid <decimal exp> to set the rack ID for an L2 controller, where <decimal exp> is

the rack ID number for the L2 controller.

reboot_l2

The reboot_l2 command reboots the L2 controller using the newest ﬁrmware image.

The reboot_l2 force command reboots the L2 controller even if the ﬁrmware image

is invalid.

reset

Use the following reset command set to reset brick(s).

• reset

• rack <rng> slot <rng> reset