User`s guide

108 007-3938-003

3: L1 and L2 Controller Commands

Example 3-84 power Command Output

L2>power

001i21:

power appears on

001r19:

power appears on

001c07:

power appears on

001c10:

power appears on

Use rack <rng> slot <rng> power to view the power status of a speciﬁed brick. Use

rack <rng> slot <rng> power up or rack <rng> slot <rng> power down to

power up or power down speciﬁed bricks. The variable <rng> following rack is one or

more rack numbers and the variable <rng> following slot is one or more slot numbers.

Example 3-85 shows sample output.

Example 3-85 rack <rng> slot <rng> power Command Output

L2>r 1 s 19 power

power appears on

Note: For the <rng> variable, you can enter a single number, or two numbers separated

by a hyphen to indicate a range, or numbers separated by commas to indicate separate

items. For <rng>, you can also enter an asterisk or the word “all” to select all the items

available.

Use power summary to display a power status summary. Use rack <rng> slot <rng>

power summary to display the power status summary for speciﬁed bricks.

Example 3-86 shows sample output.

Example 3-86 power summary Command Output

L2>power summary

all 2 bricks appear powered off

margin: 1 default, 0 low, 0 normal, 0 high, 0 custom, 0 other

L2>

Use power delay to show the delay between power commands. Use power delay

<milliseconds> to set the delay between power commands in milliseconds.