User`s guide

90 007-3938-003

3: L1 and L2 Controller Commands

Figure 3-2 Example of softreset Command Output

Used on C-brick or on server bricks performing the compute function. Note that, if a

C-brick is present, this command is valid only for the C-brick.

test

Use the following test command set to test various components in the L1 controller.

• test i2c

• test i2c <passes>

• test ioexp set <index> <value>

• test ioexp get <index>

• test ioexp get all

• test intr

• test display

• test exception <mem|stack|wdog|fatal>

Note: For this command set, you can use the mnemonic tst and exc in place of the

words test and exception.

Use the commands in this set as follows:

• Use test i2c to test the I

C bus once.