User`s guide

86 007-3938-003
3: L1 and L2 Controller Commands
Direct control of JTAG TDI signal
• scan set tdi 1
Direct control of JTAG TDI signal
• scan set psi 0
Direct control of JTAG PSI signal
• scan set psi 1
Direct control of JTAG PSI signal
• scan get
Display state of JTAG TAP signals
• scan debug <exp>
Set scan debug message level
• scan debug
Display scan debug message level
• scan info
Display scan information
• scan count
Count length of IR and BYPASS registers
• scan count <exp>
Count length of IR and BYPASS registers
Used on all bricks.
security verify
Use the security verify <3400|3800> command to test the security readiness of
SGI Origin 3400 and SGI Origin 3800 servers. Use security verify 3400 to verify
the security readiness of the Origin 3400 servers. Use security verify 3800 to test
the security readiness of Origin 3800 servers.
Used on C-bricks, I/O-bricks, R-bricks, and graphic bricks.