User`s guide

80 007-3938-003
3: L1 and L2 Controller Commands
• The Local Pwr column lists the value, “okay” or “none,” of the local power OK bit
(bit 1) for each port.
• The Link LED column lists the value, “on” or “off,” of the link LED bit (bit 2) for
each port.
• The SW LED column lists the value, “on” or “off,” of the software LED bit (bit 3) for
each port.
Note: For this command, the mnemonic prt may replace the word port.
Example 3-56 port Command Output for an R-brick
001r19-L1>port
Port Stat Remote Pwr Local Pwr Link LED SW LED
---- ---- ---------- ---------- -------- --------
A 0x02 none okay off off
B 0x0f okay okay on on
C 0x0f okay okay on on
D 0x02 none okay off off
E 0x02 none okay off off
F 0x0b okay okay off on
G 0x0b okay okay off on
H 0x02 none okay off off
Example 3-57
port Command Output for a C-brick
001c07-L1>port
Port Stat Remote Pwr Local Pwr Link LED SW LED
---- ---- ---------- ---------- -------- --------
A 0x0f okay okay on on
B 0x0f okay okay on on
Used on all bricks.
power
The following power command set displays the status of the supplies, and powers up
and powers down the supplies.
• power
• power check