User`s guide

78 007-3938-003
3: L1 and L2 Controller Commands
Example 3-49 pci 1 2 u Command Output
001i21-L1>pci 1 2 u
001i21-L1>
Use pci reset to reset all of the PCI cards in an I/O brick, Origin 300 server, or PCI
expansion module. Example 3-50 shows sample output.
Example 3-50 pci reset Command Output
001i21-L1>pci reset
001i21-L1>
Use pci <bus> reset to reset all of the PCI cards on a bus in an I/O brick, Origin 300
server, or PCI expansion module. The variable <bus> is the bus number. Example 3-51
shows sample output from the pci 1 reset command.
Example 3-51 pci 1 reset Command Output
001i21-L1>pci 1 reset
001i21-L1>
Use pci <bus><slot> reset to reset an individual PCI card. The variable <bus> is the
bus number and the variable <slot> is the slot number. Example 3-52 shows sample
output from the pci 1 2 reset command.
Example 3-52 pci 1 2 reset Command Output
001i21-L1>pci 1 2 reset
001i21-L1>
Used on I/O bricks, an Origin 300 server, or a PCI expansion module.
pimm
The following pimm command set displays the state of and sets the processor inline
memory module (PIMM) clock source and clock mode. (This command set is valid only
for C-bricks.)
• pimm
• pimm clksrc <external|internal>
• pimm clkmode <async|sync>