User`s guide

BIOS Error Beep Codes
007-5630-001 63
Discard Changes
Select this option and press <Enter> to discard all the changes and return to the AMI BIOS
Utility Program.
Load Optimal Defaults
To set this feature, select Load Optimal Defaults from the Exit menu and press <Enter>. Then,
select OK to allow the AMI BIOS to automatically load Optimal Defaults to the BIOS Settings.
The Optimal settings are designed for maximum system performance, but may not work best for
all computer applications.
Load Fail-Safe Defaults
To set this feature, select Load Fail-Safe Defaults from the Exit menu and press <Enter>. The
Fail-Safe settings are designed for maximum system stability, but not for maximum performance.
BIOS Error Beep Codes
During the POST (Power-On Self-Test) routines, which are performed each time the system is
powered on, errors may occur.
Non-fatal errors are those which, in most cases, allow the system to continue the boot-up process.
The error messages normally appear on the screen.
Fatal errors are those which will not allow the system to continue the boot-up procedure. If a fatal
error occurs, you should consult with your system manufacturer for possible repairs.