Specifications

Removing the PCI Module

If you do not have a PCI module installed, go to the next section.

If you have a PCI module installed, you need to remove it before removing the power

supply. Go to Chapter 4, “Removing the PCI Module” on page 89 for instructions on

removingthePCImodule.Thenreturnhereandfollowtheinstructionsbelow to remove

the power supply.

Removing the Power Supply

If you have not already done so, power off the OCTANE workstation and remove the

power cable from the electrical outlet. If it is installed, remove the PCI module as well.

See “Preparing the Workstation to Removeor Install the Power Supply” on page 72and

followthe directions for poweringoffthe workstation (andremovingthe PCI module)if

you have not already done so.

You do not need to use the wriststrap when removing the power supply.

Caution: Donot removethe power cable fromthe power supplyuntilthepowersupply

is out of the chassis.