Specifications

Verifying Memory Installation
67
2. If the amount of memory is incorrect, follow the directions at the beginning of this
chapter to power off your system and check the installation or removal procedure.
■ Check the angle of the DIMMs. They should be upright and completely seated.
■ Check that eachbank ispopulated with twoDIMMS, and thatthey arethe same
type. You must have an even number of DIMMS installed.
■ Check the color of the label on the DIMM. Both DIMMs in a bank must be the
same with the same colored label.
■ Complete the installation or removal procedure. If, after you have powered on
the OCTANE workstation, checked the amount of memory in “About This
System,” and found that the amount of memory that is registered is still
incorrect, see Chapter 8, “Troubleshooting.”