Specifications

Installing and Removing Memory
57
1. With the system module lying on a flat, dry, antistatic surface, locate the DIMM
banks and sockets as shown in Figure 2-17 and Figure 2-18.
2. Locate the DIMMs you want to remove.
Caution: Do not touch the connector near the DIMM removal levers.
Figure 2-19 Removing a DIMM
3. Remove the DIMMs.
■ Press down on the latch at the end of the DIMM socket. The DIMM partially
ejects from the socket. (Step A)
■ Remove the DIMM. (Step B)
Note: Both sockets in a DIMM bank must be either empty or populated. If you are
removingoneDIMMand not replacingitimmediately, also removetheother DIMM
in the bank and replace it when you install a new DIMM.
DIMM sockets
A
B