Specifications

Setting Up the OCTANE Workstation
13
Figure 1-8 Attaching the Speaker and Power Cable to the Active Speaker
5. Connect the speaker/workstation cables (the cable with two connectors on each
end) to the active speaker. The connectors cannot be installed incorrectly because
they are different sizes; male/male on one end, female/male on the other.
■ Connect the female connector to the power (middle) port on the back of the
right (active) speaker.
■ Connect its paired male connector to the R port on the back of the right (active)
speaker.
Right (active) speaker
Power
To speaker port
on workstation
To left speaker
Power
Speakers