Specifications

Removing and Installing the Plastics: Top and Base
255
Figure 7-35 Lifting the OCTANE Workstation off the Plastic Base
Warning: Do not attempt to lift the OCTANE workstation by yourself. It is
heavy and requires two people to safely lift.
4. Lift the chassis straight up and off the plastic base.
5. Place the new plastic base on a clean surface.
6. Align the first four tabs on each side of the chassis with the slots in the base and
lower the chassis onto the base.
7. Slide the chassis forward about one and one half inches until it locks to the base.
8. Place the plastic cover over the chassis and snap it into place.