Specifications

246
Chapter 7: Installing and Removing Drives and Front Module Parts
• Remove and the system fan.
• Reinstall everything and start the system.
Follow the instructions below to replace the system fan.
1. Go to “Shutting Down and Powering Off the System” on page 218 and follow the
instructions through removing the bezel. Then return to this section, step 2.
2. Go to “Replacing the System Drive” on page 231 and “Removing Internal Option
Drives” on page 228 to remove the system drive and any option drives that are
installed. Then return to this section for instructions on removing the frontplane
module.
3. Remove the light module. Go to “Replacing the Light Module” on page 235 for
instructions on removing the light module. Then return to this section.
4. Go to “Removing and Installing the Frontplane Module and System Identification
Module” on page 237 and follow the instructions through step 5. (Do not remove
the system identification module.) Then return here for instructions on removing
and replacing the fan.