Specifications

236
Chapter 7: Installing and Removing Drives and Front Module Parts
To replace the light module, go to “Shutting Down and Powering Off the System” on
page 218 and follow the instructions through removing the bezel. Then return to this
section and follow the instructions below.
The light module is directly under the system drive.
Figure 7-20 Removing the Light Module
1. Squeeze both top and bottom wings together at both ends of the light module and
gently pull straight back.
2. If the light module does not release, squeeze more firmly until it releases from the
workstation.
3. Discard the module.
Light module