Specifications

Installing and Removing Internal Drives
223
Installing an Internal Option Drive
Figure 7-6 Identifying the Option Drive Bays
To prepare the OCTANE workstation before installing an internal drive, see “Shutting
Down and Powering Off the System” on page 218 and follow the directions through
removing the bezel.
The option drive bays are the two top drive bays. Install an option drive in either one.
The OCTANE workstation automatically assigns an address to an internal drive. The
system drive is SCSI ID 0-1, the drive directly above it is SCSI ID 0-2, and the upper
option drive is SCSI ID 0-3.
Light module
System drive
Option drive bays