Specifications

220
Chapter 7: Installing and Removing Drives and Front Module Parts
To remove the bezel, you first shut down and power off the system. If you have not
alreadydoneso,goto“ShuttingDown and Powering Offthe System” on page 218. Then
return here and follow these steps:
1. Locate the lockbar. If no lockbar is in place, skip to step 4.
Figure 7-3 Unlocking and Removing the Lockbar
2. Unlock and remove the lockbar, if it is in place. (Step A)
3. Close the door on the front of the OCTANE workstation. (Step B)
A
B