Specifications

212
Chapter 6: Installing and Removing External Devices
Replacing the Keyboard or Mouse
Figure 6-19 Disconnecting the Mouse and Keyboard
1. See “Shutting Down and Powering Off the System” on page 190 to shut down the
system.
It is recommended that you connect the keyboard to the keyboard port, and the
mouse to the mouse port. However, both work in the either port. You must power
off the workstation to switch the ports.
Note: While you can disconnect and reconnect it to its port while the system is on,
you cannot switch ports while the OCTANE workstation is on.
For pinout and technical information, see Appendix C, “Technical Specifications.”
2. When the workstationis shutdown, disconnectthe mouseor keyboard fromits port
on the back of the workstation.
3. Connect the new mouse or keyboard cable to the workstation.
4. Power on the workstation.
To keyboard
To mouse