Specifications

Installing Audio Devices
207
4. Drape the cord over the back of the monitor. Draping the cord over the side of the
monitor causesthe microphone to point away fromthe user, reducing the quality of
the sound.
5. Attach the microphone cable to the microphone port on the OCTANE workstation.
For pinout and technical specification information, see Appendix C.
Installing the Speakers and Headphones
The speakers connect to the OCTANE workstation onthe system module.If you choose
to use the headphones without the speakers, plug the headphones directly into the
speaker port. Otherwise, insert the headphones into the jack on the front of the right
(active) speaker.
Before connecting the speakers to the OCTANE workstation, power it off. For
instructions on shutting down and powering off the OCTANE workstation, turn to
“Shutting Down and Powering Off the System” on page 190. Then return here for
instructions on attaching the speakers.